360 DELTA 4 – D’AVINO MIXERS

360 DELTA 4 – D’AVINO MIXERS

Self-loading concrete mixer – Net output 4,5 m3 (S1 class) – Load and cast through the full 360° (continuous rotation) – 4 wheel driving and steering – Articulated bucket integral with rotating frame – Cab integral with 360° rotating frames (continuous rotation).

The 360 DELTA 4 presents itself as the solution to visibility issues that every other conventional mixer suffers from. Dead angles which inhibit direct view can affect safety and productivity, delaying return on your investment. The 360 DELTA 4 addresses this problem with superior visibility.

ENGINE – Perkins 1104D-44TA -Diesel 4 stroke – 4 cylinders in line -Turbo charged Aftercooled – Direct – Mechanical injection – Max power 83@2.200 kW@RPM – Max torque 418@1.400 Nm@RPM – Water cooled – Dry air filters – USA EPA Tier 3 / EU STAGE IIIA Compliance

TRASMISSION – Integral 4×4 – N.4 forward / rearward gears (2 mechanical + 2 hydraulic) – Max speed 32 km/h – Full load Max Slope Pendenza max superabile a pieno carico 40% Hydrostatic – “Automotive” – powered by variable displacement pump and dual displacement hydrostatic motor – electrohydraulic control lever to select a “slow” gear, “fast” gear and “reverse”. Double ratio mechanical gearbox with electric control gear lever to selection of “work” or “transfer” gear. Inching command.

AXLES – Hurth load bearing with final epicyclical gearing reducers – Oscillating front axle (± 6°) – Fixed rear axle.

BRAKE – Oil-bath disc brakes acting on four wheels powered by a twin independent circuit – Hydraulic inner in-oil power disc parking brake acts directly on rear axle – Emergency brake incorporated directly on service brake.

STEERING – Hydrostatic powered by an independent pump controlled by the steering wheel – Four wheel steering by means of double action twin cylinders – Steering Selector Device on Operator’s Console for: Front Wheel Drive, 4 Wheel Bi-Lateral Drive, 4 Wheel Parallel Drive – Int. turning radius 2.000 mm – Ext. turning radius 4.300 mm.

FRAME – Electrically Welded High-tempered steel – Rotating frame assembled on slew bearing allowing 360° hydraulic rotation – Automatic and negative mechanical Stop\Block – Drum lifting hydraulic control. Hydraulic Chute control (rotation and tilting got by dual action cylinder). In cab and on ground chute actuation.

DRUM – Double spiral mixing blade and emergency manhole, double cone and convex end – Hydrostatic gear motor and variable displacement pump – In cab and on ground drum actuation – Hydraulic lifting for fast casting – metric volume approx. 5800 Lt – Concrete Yield 4,5 mc – Drum Speed 18 RPM in both directions 360° drum slewing.

BUCKET – Articulated bucket – N.2 dual action cylinders for arms lifting and n.1 dual action cylinders for bucket opening/closing – Electro-hydraulic command for bucket’s door actuation – Bucket capacity 600 lt – Productivity up to 4 cycle/hour.

CAB – Integral with slewing frame. Continous 360° rotation for visibility enhancement during every cycle phase. ROPS and FOPS requirement compliance. – Adjustable – anatomically designed seat with springy ergonomically shaped suspension. – Adjustable armrest with twin joystick. – Thermoformed (ABS) steering column equipped with electronic display. – User friendly dashboard and control panels – Closed cab with lenhanced visibilità – Wiper on fontal winshield.

HYDRAULIC SYSTEM – Servo-controlled hydraulic distributor (4 elements) – Hydraulic distributor electrically managed (6 elements) – Volumetric alternative pump for drum rotation 34Lt @ 1000 RPM – Gear pump for utilities 26Lt @ 1000 RPM – Gear pump for power steering 20Lt @ 1000 RPM – Hydrostatic circuit filter (intake) 10 micron; Hydraulic circuit filter (outlet) 40 micron. Aluminum heat exchanger equipped with electrically powered fan.

WATER SYSTEM –  Rapid Intake Water Pump with “Self-Priming” rotor. In cab and on ground actuation permitted. Two multiposition taps for water delivery – Alternate Water Intake capabilities with quick disconnect hoses and filter – Flow rate 500Lt/min. – Max Pressure 2.2 bar – N.1 water tank integral with slewing frame: capacity approx. 350 lt. – N. 2 auxiliary water tank: capacity approx. 635 Lt – Electronic water meter.

ELECTRIC SYSTEM –  Starter 12V 3kW – Alternator 12V 95A with incorporated regulator. – Battery 12V – 110 Ah.

GROUND COMMAND –  Water meter and controls for water pump operation, drum rotation, chute actuation and emergency stop.

DIESEL, OIL AND COOLANT –  Diesel (tank capacity) 120 l – Hydrauli oil (tank capacity) 100 l – Oil motor 9,5l – Engine coolant 7,0 l.

TYRES 18-19,5 – 16 PR.

DIMENSIONS 2.500×6.845×3.270 mm (bucket on ground).

MASS Curb weight 7.800 kg.

HOMOLOGATION Meets CEE road standards.

MACHINE EQUIPMENT – Clamshell bucket – Railway application – DAS – Davino Advanced System – Weighing system with printer – Additives – Air conditioning – High pressure cleaning pump – Automatic grasing unit – Rearward camera – Impact sensors – Work lamp – Chute extension.

CONTACT

Contact Information

This Equipment has been inspected by an authorized  dealer or service partner and includes additional services.

14 EL- Rasheedy St , Sheraton Cairo,EGYPT
PHONE:
+202-22695793
EMAIL:
info@igteco.com

Message to Vender

Your Name:

Your telephone number:

Email:

Product Name:

Your Message

LOCATION

Call for Price
Sales: +202-22695793
Manufacturer D’Avino
Condition New
Fuel type Diesel
Function Mixers
Financing calculator
Equipment price (EGP)
Interest rate (%)
Period (month)
Down Payment (EGP)
Calculate
Monthly Payment
Total Interest Payment
Total Amount to Pay