Engine – 4 stroke 4 cylinder turbo diesel 1104D-44T – Water Cooled –Dry Air Filter–Max Power 74 kW @ 2300 RPM– Stage 3
Transmission – 4×4 Hydrostatic (“Air cooled with oil heat exchanger”) powered by the variable delivery pump and dual displacement hydraulic motor controlled by an electro-hydraulic selector lever producing a high-low ratio in both forward and reverse – Max speed 28 Km/H – Hydraulic Accelerator – Inching Pedal.
Axles – over-sized load bearing with final epicyclical gearing reducers – Front axel able to oscillate at 10° – Fixed rear axle.
Electrical System Starter – 12V 3 kW. Alternator 12V 90A with regulator incorporated. Battery 12V 92Ah.
Brakes – inner in-oil power disc brakes acting on all four wheels with power supplied by a twin circuit independent pump – Hydraulic inner in-oil power disc parking brake acts directly on rear axel – Emergency brake incorporated directly on service brake
Frame Electrically Welded High-tempered steel – Frame mounted on roller bearing swivel ring with 315° hydraulic rotation – Automatic and negative mechanical Stop\Block – Control of the hydraulic lifting of drum cylinder by double effect Chute with hydraulic tilt and dual action cylinder controlled from Operator’s Turret or from the ground and hydraulic rotation by dual action cylinder controlled from Operator’s Turret.
Steering Hydrostatic (Orbital Type) – fed by an independent pump controlled by steering wheel – Four wheel steering by means of double action twin cylinders- Steering Selector Device on Operator’s Console for: Front Wheel Drive, 4 Wheel Bi-Lateral Drive, 4 Wheel Parallel Drive
Bucket – Loading arm with fixed high pendant dumping bucket for fast and hassle free discharge of aggregates – Cap. 600Lt– Loader Arms with 2 lifting cylinders and dual return action – 8 loading shovel – Single lever control
Water System – Rapid Intake Positive Displacement Water Pump with “Self-Priming” Rotor, controlled by both the driver’s seat from the ground – Delivery 500Lt/min. – Max Pressure 2.2 bar – Dual Standard Water tanks approx. 650 Lt – Two multi-position taps for water delivery to mixing drum – Alternate Water Intake capabilities with quick disconnect hoses and filter- cleaning hose – Electronic water meter – Emergency stop from ground
Operator’s Turret Welded to the rotating frame, with a possibility to rotate at 315° allowing perfect visibility in transfer and work phases – Adjustable anatomically designed seat with springy suspension ergonomically shaped for easy access to controls – Adjustable articulated armrest with joystick – Steering column thermoformed with electronic display instrumentation easily accessible and readablev – User friendly dashboards and control panels- Closed cab with large high visibility windshield and wiper
Hydraulic System – 3 Component Hydaulic Distributor – Variable cylindered pump and piston for rotation drive of drum 34Lt @ 1000 RPM – Geared pump for utilities 26Lt @ 1000 RPM – Geared pump for power steering 20Lt @ 1000 RPM – Max pressure 250 bar – Hydrostatic circuit filter (intake) 10 microns; Hydraulic Circuit filter (intake) 25 microns.
Drum Trilateral discharging, double spiral mixing blade drum with emergency manhole, double cone and convex – Hydrostatic motor-gear and variable delivery pump with orbital engine together of the redactor – Electro-hydraulic command both from the operator’s turret or from ground – Geometric volume approx.. 5100 Lt (1347 gals.) Max Concrete Yield 3,6 mc – Drum Speed 22 RPM in both directions – Drum flexible to 180° – Hydraulic telescopic hoisting cylinder for easy and quickly discharge of cement
Ground commands water meter and controls for water pump operation, drum rotation, up/down chute and emergency stop
Dimensions (Bucket Down) L-6930 mm (@272”) W-2330 mm (@91”) H-3160 mm.(@ 124”).
Weight with open cab kg – Tires 18-19.5/16 PR – Meets CEE road standards